Low-Cost Metal Research Tool Vacuum Induction Melting & Casting Furnace Melting Capacity 1kg

Minimal-cost steel analysis instrument vacuum induction melting & casting furnace melting capacity 1kg

Solution description of casting furnace:
IMCS-2000-E is a simplified variation of higher vacuum induction melting & casting furnace, which can smelt numerous alloys with a highest melting capacity of 1kg (in accordance to Fe density), the optimum melting temperature can attain 2000 °C, and the vacuum can achieve 10 -6 Torr (employing a molecular pump system). This unit is a lower-value metal study tool.

Features of casting furnace:
Minimal value, minimal value metal melting and casting in a protective atmosphere
• Optimum melting capability up to 1kg (according to Fe density)
• With manual casting for pouring samples in a vacuum or environment secured surroundings

CZPT specifications of casting furnace:

Power requirement • Input voltage: 380 VAC, a few stage
• Optimum present: 35A
• Maximum output power: 15KW
Vacuum chamber
• The vacuum chamber is made of SS304 stainless metal
• Vacuum chamber dimensions: Φ320mm x 320 mm
• There is a quartz observation window (diameter Φ120mm) on the door for easy observation of samples
• Has a rocking handle that can be shaken for casting samples in an atmosphere-safeguarded setting
• One particular KF25 and one particular KF40 interface at the rear of the cavity (Figure one)
• The KF60 interface is on the left facet of the chamber for relationship to the molecular pump system
• With a crucible dumping gadget for pouring samples into h2o-cooled copper or graphite molds
• Clients can purchase casting molds at our firm
• Optional drinking water-cooled copper mould (Determine 2)
• There is a KF25 port on the leading for connecting the handbook CZPTary feeding mechanism (Figure three-5) (optional), which can be added to the melting pot throughout the melting approach.
Ambiance security
• The furnace body can be created to move substantial-purity Ar gas with a force of .05MPa.
• The mechanical strain gauge is installed on the products and the take a look at selection is -.1MPa-.2MPa.
• A float circulation meter (.two-2L/min) is installed on the device to regulate ingestion air circulation
• Vacuum: ten-two Torr (with mechanical pump), 10-6 Torr (with molecular pump technique)
Induction heating energy supply
• 15KW (thirty-80Khz) inductive electrical power provide with time controller and electricity controller
• Induction coil: Φ90 mm x eighty mm H (other measurements can be requested)
• 58L/min drinking water cooler is necessary for water cooling in the tools (not included in the CZPT)
Temperature control
• No temperature management technique
• Adjustable output electrical power of the inductive energy source for smelting needs of different metals

Focus points of casting furnace:
• The gas cylinder should be outfitted with a pressure minimizing valve (a strain lowering valve can be bought at our organization). The gasoline output stress need to be less than .02 MPa. When the metallic is smelted, the gas stream in the chamber must be ensured, and the gasoline strain in the chamber need to be significantly less than .02 MPa.
• In the course of the smelting method, the strain gauge must display the air strain in the chamber in genuine time. Once the air strain is higher than .02 MPa, the air bleed valve must be opened and the cylinder shut to terminate the experiment.

Merchandise pictures of casting furnace:

Started in 2005, HangZhou CY CZPT CZPT Co., Ltd. is a business specializing in the development and manufacturing of laboratory technology research tools. The products are combined, pressed, burned, lower, floor, polished, coated, analytical tools and connected consumables. CZPT incorporate laboratory sintering gear, coating gear and so on. At present, it has been exported to twenty five countries and areas these kinds of as the CZPT States, CZPTe, and CZPT Asia, and has been well received by different scientific research models.

We have a mature technology investigation and growth group, the number of specialists is 33, the business has one hundred fifty individuals, far more than 500 sq. meters of business office area, the manufacturing facility covers an spot of about 1,500 square meters positioned in HangZhou Large-tech Zone CZPTtronic CZPT Park. The merchandise are largely found in the analysis marketplace, serving scientific study in the labs of universities and colleges, and can also personalize products in accordance to your demands.

Q. Are you a manufacturer or a investing business?

A. We are skilled laboratory instrument producers, have their very own design and style group and manufacturing facility, have mature complex encounter, and can assure the good quality of items and the best cost.

Q. How is your firm’s product after-revenue support technique?

A. The merchandise guarantee interval is 12 months, we can supply lifetime servicing. We have specialist pre-product sales and right after-revenue departments that can react to you in 24 several hours to take care of any technological issues.

Q. How lengthy is your delivery time? If I want to customise the instrument, how extended does it get?

A.one. If the items are in stock, it is five-ten days. two. We can supply CZPT solutions for our clients. It normally normally takes thirty-60 days depending on the specifications of the custom made instrument.

Q. Our country’s energy offer and plug are different. How do you fix it?

A. We can offer a transformer and plug in accordance to your neighborhood needs in accordance to the electrical power plug of different nations.

Q. How to pay?

A.T / T, L / C, D / P, and many others., it is suggested to use Alibaba CZPT Ensure.

Q. How is the deal of goods? Shipping techniques?

A.1. Standard export fumigation indicator wood box packaging 2. Categorical, air, sea delivery in accordance to buyer requirements, find the most suitable way.

Much more questions, remember to get in touch with client support.

Low-Cost Metal Research Tool Vacuum Induction Melting & Casting Furnace Melting Capacity 1kg